[. . . ] Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor This product is in accordance with applicable EC directives. Noise emission to the environment according to the European Community’s Directive. [. . . ] € • • • • Long-term storage Empty the fuel/oil tanks in a well ventilated area. Ensure the machine is cleaned and that a complete service is carried out before long-term storage. Be aware of the risks of fire, explosion and those associated with inhalation. Fuel safety • • • • 1 2 Never refuel the machine while the engine is running. Make sure there is plenty of ventilation when refuelling or mixing fuel (petrol and 2-stroke oil). Move the machine at least 3 m from the refuelling point before starting it. Never start the machine: If you have spilt fuel or chain oil on the machine. If you have spilt fuel on yourself or your clothes, change your clothes. 3 18 – English STARTING AND STOPPING Starting and stopping Air purge, 3: Press the air purge diaphragm repeatedly until fuel fills the diaphragm (at least 6 times). Hold the chain saw on the ground by placing your right foot through the rear handle. (22) Pull the starter handle, 4: Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly until the engine fires. Push down the red choke control, 5: As soon as the engine fires which can be heard through a "puff" sound, push down on the red choke control. Pull the starter handle, 6: Keep on pulling the cord powerfully until the engine starts. Warm engine CS 410 Elite Keep people and animals well away from the working area. Start position, 1: The correct choke/start throttle setting for warm starting is obtained by initially moving the choke control by pulling the red control outward - upwards. (21) Air purge, 2: Press the air purge diaphragm repeatedly until fuel fills the diaphragm (at least 6 times). (21) Push down the red choke control, 4: This inactivates the choke, which is not needed when starting a warm chain saw. However the movement of the start/stop switch will have engaged a high idle, making warm starting easier. Pull the starter handle, 5: Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle. (22) CS 450 Elite Start position, 1: The correct choke/start throttle setting for warm starting is obtained by initially moving the choke control by pulling the red control outward - upwards. (23) Decompression valve, 2: Press the valve to reduce the pressure in the cylinder and make starting easier. [. . . ] Power, m/sec 13/33 13-18/33-45 12-17/31-43 0, 325/8, 3 0, 050/1, 3 Spur/7 17, 3 13/33 13-18/33-45 12-17/31-43 0, 325/8, 3 0, 050/1, 3 Spur/7 17, 3 2, 0 2, 5 2, 4 2, 9 104 113 115 114 116 4, 7 5, 3 0, 35 13 0, 24 Automatic 0, 46 13 0, 30 Automatic NGK BPMR 7A/ Champion RCJ 7Y 0, 5 NGK BPMR 7A/ Champion RCJ 7Y 0, 5 40, 9 41 31 2900 1, 6/9000 45, 7 42 33 2700 2, 0/9000 CS 450 Elite Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/ EC. Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound pressure level is a standard deviation of 1 dB (A). Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration levels under various working conditions. [. . . ]